China FLIER factory 3.5kw 4.5kw 5.5kw 7.5kw 10kw 15kw 72v 96v Pmsm Motor Permanent-magnet Synchronous Motor with planetary gearbox planetary gearbox clutch

Warranty: 3months-1year
Model Number: D5BLD300-24A-30S
Usage: Tie-yarn machine / Massager / Cut-card machine
Type: GEAR MOTOR
Torque: 0.96N.M
Construction: Permanent Magnet
Commutation: Brush
Protect Feature: Totally Enclosed
Speed(RPM): 3000RPM
Continuous Current(A): 15.63A
Efficiency: IE 4
Certification: ce
Motor Dimensional: 37mm
motor shaft dimensional: 7mm
motor weight: 0.35kg
Packaging Details: According to the size of the motor for safe packing.
Port: HangZhou

Kindly remind: As different customers may need different motor parameter for fitting your equipment. If below motor can’t fit your need, please kindly send inquiry to us with information for rated power or torque,rated speed, and rated voltage for our new size drawing making for you. Thanks a lot!Dimensions (Unit: mm )Mounting screws are included with gearhead Customizable accessories:motor length, shaft, voltage,power,rated speed and so on.Feature: A. High power range from 5W to 20KW B. Rich stock and fast shipping time in 10 working days C. Easy for speed & direction adjustmentD. 16mm to 220mm size range with low noisy E. Strong stability for driver/controllerF. Lifetime above continuous 10000 hoursG. IP65 protection rank is available for us H. Above 90% enery efficiency motor is available I. 3D file is available if customers neededJ. Permanent magnet brushless dc motor K.High-performance and stable matching driver and controllerNotice for Usage: 1).Please don’t use motor out of the range of nameplate of gear box and motor and the specification of productcatalogue, avoiding getting an electric shock, hurting or damaging the device. 2).Please do not put your fingers and things intothe opening part of gear or motor ,in order to prevent getting and electric shock,hurting,catching a fire of damaging device etc.3).Please do not use the Injured gear head of motor, in prder to orevent hurting,catching a fire etc. 4).Please do not put off thenameolate. 5) If the products are reformed by the customers personally, it no longer belongs to the guarantee scope, and ourcompany doesn’t undertake any responsibility. 6) When you move it, if it shed off or tilt to 1 side, it is very dangerous,please pay more attention. 7) Please must not put the flammable thing near the gear head and motor, in order to prevent catching afire. FLIER TECH is a professional manufacturer was founded in 2009 in HangZhou, Factory in PanYu, HangZhou, who boats 12 years of experience in the motor and controller industry. Our main products are Brushless DC Motor, Brushless Controller, DC Servo Motor and Controller, Planetary Gear Motors, Worm Gear Motors, Brush DC Motor and AC Motor,BMS… They are widely used in AGV, RGV, Robots, Lifting Equipment, Cleaning Mmachines, Medical Equipment, Cafe Machinery, Packing Machinery, Amusement Game Machines, Automobiles, Industrial Equipment Etc. With a plant area of 4000 square meters, we have the independent design and development capabilities and strong technical force, with an annual output of more than 1 million units. OEM/DM orders are welcome, FLIER motors had exported to 20 countries until now, including the US, Germany, Italy, UK, Poland,Australia ,Saudi Abrabia, Switzerland, Sweden Japan etc. We are looking forward to establishing a long-term friendly business relationship with you. Q1: What kind motors you can provide?A1: For now, we mainly provide permanent magnet brushless dc motor, dc gear motor, micro dc motor, planetary gear motor, dc servo motor, brush dc motors, with diameter range from 16 to 220mm,and power range from 5W to 20KW.Q2: Is there a MOQ for your motors?A2: No. we can accept 1 pcs for sample making for your testing,and the price for sample making will have 10% to 30% difference than bulk price based on different style.Q3: Could you send me a price list?A3: For all of our motors, they are customized based on different requirements like power, voltage, gear ratio, rated torque and shaft diameter etc. The price also varies according to different order qty. So it’s difficult for us to provide a price list. Ifyou can share your detailed specification and order qty, we’ll see what offer we can provide.Q4: Are you motors reversible?A4: Yes, nearly all dc and ac motor are reversible. We have technical people who can teach how to get the function by different wire connection.Q5: Is it possible for you to develop new motors if we provide the tooling cost?A5: Yes. Please kindly share the detailed requirements like performance, size, annual quantity, target price etc. Then we’ll make our evaluation to see if we can arrange or not.Q6:How about your delivery time?A6: For micro brush dc gear motor, the sample delivery time is 2-5 days, bulk delivery time is about 15-20 days, depends on the order qty. For brushless dc motor, the sample deliver time is about 10-15 days; bulk time is 15-20 days.Please take the sales confirmation for final reference.Q7:What’s your warranty terms?A6: One year

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetarygearbox

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

China FLIER factory 3.5kw 4.5kw 5.5kw 7.5kw 10kw 15kw 72v 96v Pmsm Motor Permanent-magnet Synchronous Motor with planetary gearbox     planetary gearbox clutchChina FLIER factory 3.5kw 4.5kw 5.5kw 7.5kw 10kw 15kw 72v 96v Pmsm Motor Permanent-magnet Synchronous Motor with planetary gearbox     planetary gearbox clutch
editor by czh