Merchandise Description
Product Description
The reducer is typically used for minimal-speed and large-torque transmission equipment. The motor, internal combustion engine or other higher-pace working power is utilised to attain the function of deceleration by meshing with the big equipment on the output shaft via a gear with a little number of teeth on the enter shaft of the reducer. The reducer will also have many pairs of gears with the identical principle to accomplish the perfect reduction influence. The ratio of the variety of enamel of the large and small gears is the transmission ratio.
SPECIFICATIONS | Stage | RATIO | RATED TORQUE (N.m) | ||
SPLF60 Planetary Gearbox |
L1 | four | 25 | ||
5 | 28 | ||||
7 | 20 | ||||
10 | 10 | ||||
L2 | 16 | 30 | |||
20 | 30 | ||||
twenty five | 32 | ||||
28 | 30 | ||||
35 | 30 | ||||
40 | 25 | ||||
50 | 25 | ||||
70 | 20 | ||||
Adapted motor | ∅ 14-30/ ∅50-3/∅70-M4 | ||||
Rated Input Speed (rpm) | 3000/min | ||||
Max Enter Pace (rpm) | 6000/min | ||||
Backlash | L1 | ≤10 Arcmin | |||
L2 | ≤15 Arcmin | ||||
Fault stop torque(N.m) | 2 instances of rated torque | ||||
Efficiency | L1 | 96% | |||
L2 | 94% | ||||
Average existence span | 20000h | ||||
Operating temperature | -10°~+90° | ||||
Nosie | ≤60 db | ||||
Weight (kg) | L1 | 0.seventy five | |||
L2 | 1 | ||||
IP | 54 | ||||
Installation strategy | Any installation approach |
Manufacturing Selection
42 Collection Planetary Gearbox
Backlash: ten-15 arcmin
Ratio Selection:
L1: 4,5,7,ten,
L2: twelve,sixteen,twenty,25,28,35,40,50,70
Frame Dimension: 42mm Enter Flange
Equipment Arrangement: Planetary Straight Tooth
60 Series Planetary Gearbox
Backlash: ten-15 arcmin
Ratio Selection:
L1: 4,5,7,10,
L2: 16,20,twenty five,28,35,40,fifty,70
Frame Dimension: 60mm Enter Flange
Equipment Arrangement: Planetary Straight Enamel
ninety Series Planetary Gearbox
Backlash: 10-15 arcmin
Ratio Variety:
L1: 4,5,7,10,
L2: 16,20,twenty five,28,35,forty,fifty,70
Body Dimension: 90mm Enter Flange
Equipment Arrangement: Planetary Straight Enamel
Powder Metal Series Planetary Gearbox
Backlash: ten-fifteen arcmin
Ratio Selection:
L1: 4,5,7,10,
L2: sixteen,twenty,25,28,35,forty,fifty,70
Frame Dimension: 42mm & 57mm
Gear Arrangement: Planetary Straight Tooth
Appropriate Angle Collection Planetary Gearbox
Backlash: ten-fifteen arcmin
Ratio Variety:
L1: 4,5,7,ten,
L2: 16,20,twenty five,28,35,forty,fifty,70
Body Dimension: 60mm & 90mm
Equipment Arrangement: Planetary Straight Teeth
Software Field
Computerized Arms
Assembly Line
3D-Printer
Health-related -Gear
CNC Device
Tapping Equipment
Other Automation Units
Why Decide on Us
ZheJiang Higher Precision Gear Transmission Co., Ltd
Company Profile
ZheJiang Higher Precision Equipment Transmission Co., Ltd situated in HangZhou metropolis, ZheJiang Province, China. It is a major firm devoted in precision transmission parts and system study, manufacture and sales, a variety of sequence of products are produced in its 5000 square meters workshop, the precision planetary gearbox and gear motor are created specially for photo voltaic power industry and have served a lot of huge-scale solar assignments worldwidely.
The research crew has a lot more than 15 years activities in this field, who can make sure a punctual and productive support to fulfill customer’s specific wants. It has pasted the ISO9001 high quality management system and CE, products have been exported to tons of countries with a broad range application in AGV, clever robotic, logistic, industrial automation, photo voltaic power, vessel, packaging and textile and so on.Consistently, our aim is to advertise the software of photo voltaic power market in the planet, and we think it gives thoroughly clean and sustainable energy for humanity to greater safeguard our surroundings.
Staff
CERTIFICATIONS
FAQ
Q1:Which regions are your items primarily utilized in?
A:At current, we have 2 primary items: precision planetary equipment reducer and solar geared motor. Most of the precision planetary reducers are utilised in automation fields, such as medical products, 3D printers, doorway openers, tapping equipment, CNC lathes and a series of automation products. In addition, our photo voltaic geared motors are utilised in photovoltaic power generation tasks, which are mainly merged with rotary drives to travel photo voltaic panels to monitor daylight.
Q2: How to decide on the ideal planetary gearbox?
A :First of all, we need you to be CZPT to supply relevant parameters. If you have a motor drawing, it will enable us recommend a suited gearbox for you more rapidly. If not, we hope you can supply the following motor parameters: output speed, output torque, voltage, present, IP, sound, running situations, motor measurement and electricity, and so on.
Q3: What is the price tag ?
A : The main figuring out element for the value of every single merchandise is the get quantity. You can communicate with us and allow us comprehend each and every other. I imagine that our charges, product quality and our providers can undoubtedly make you satisfied.
This autumn: Do you provide personalized provider?
A: Yes, we supply customized services. You only want to put forward your wants, and we will do our greatest to give you with a strategy, make ideas, and try out our greatest to satisfy your needs.
Application: | Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Vertical Type |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Double-Step |
###
Samples: |
US$ 45/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
SPECIFICATIONS | STAGE | RATIO | RATED TORQUE (N.m) | ||
SPLF60 Planetary Gearbox |
L1 | 4 | 25 | ||
5 | 28 | ||||
7 | 20 | ||||
10 | 10 | ||||
L2 | 16 | 30 | |||
20 | 30 | ||||
25 | 32 | ||||
28 | 30 | ||||
35 | 30 | ||||
40 | 25 | ||||
50 | 25 | ||||
70 | 20 | ||||
Adapted motor | ∅ 14-30/ ∅50-3/∅70-M4 | ||||
Rated Input Speed (rpm) | 3000/min | ||||
Max Input Speed (rpm) | 6000/min | ||||
Backlash | L1 | ≤10 Arcmin | |||
L2 | ≤15 Arcmin | ||||
Fault stop torque(N.m) | 2 times of rated torque | ||||
Efficiency | L1 | 96% | |||
L2 | 94% | ||||
Average life span | 20000h | ||||
Operating temperature | -10°~+90° | ||||
Nosie | ≤60 db | ||||
Weight (kg) | L1 | 0.75 | |||
L2 | 1 | ||||
IP | 54 | ||||
Installation method | Any installation method |
Application: | Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Vertical Type |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Double-Step |
###
Samples: |
US$ 45/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
SPECIFICATIONS | STAGE | RATIO | RATED TORQUE (N.m) | ||
SPLF60 Planetary Gearbox |
L1 | 4 | 25 | ||
5 | 28 | ||||
7 | 20 | ||||
10 | 10 | ||||
L2 | 16 | 30 | |||
20 | 30 | ||||
25 | 32 | ||||
28 | 30 | ||||
35 | 30 | ||||
40 | 25 | ||||
50 | 25 | ||||
70 | 20 | ||||
Adapted motor | ∅ 14-30/ ∅50-3/∅70-M4 | ||||
Rated Input Speed (rpm) | 3000/min | ||||
Max Input Speed (rpm) | 6000/min | ||||
Backlash | L1 | ≤10 Arcmin | |||
L2 | ≤15 Arcmin | ||||
Fault stop torque(N.m) | 2 times of rated torque | ||||
Efficiency | L1 | 96% | |||
L2 | 94% | ||||
Average life span | 20000h | ||||
Operating temperature | -10°~+90° | ||||
Nosie | ≤60 db | ||||
Weight (kg) | L1 | 0.75 | |||
L2 | 1 | ||||
IP | 54 | ||||
Installation method | Any installation method |
Planetary Gearbox Basics
If you’re in the market for a new Planetary Gearbox, you’ve come to the right place. There’s more to these mechanical wonders than just their name. Learn about Spur gears, helical gears, and various sizes. After you’ve read this article, you’ll know exactly what to look for when shopping for a new one. And you’ll also be able to avoid common mistakes made by amateur mechanics.
Wheel drive planetary gearboxes
Planetary gearboxes have numerous benefits over conventional gearboxes. Their compact design is advantageous for servo functions. Their lubrication is a key feature to maintain smooth operation and avoid damage to the gears. Some manufactures use CZPT to ensure proper functioning. These gearboxes have nearly three times the torque of traditional gearboxes while remaining compact and low in mass.
The planetary gears are made of three different types. Each type has an input and output shaft. The input and output shafts are usually coaxially arranged. The input and output shafts are connected to each other via a carrier. The carrier rotates with the planetary gears. The sun gear is the input gear and is typically 24 teeth in diameter. The outer gears are connected to the sun gear via rings of gears that are mounted around the sun gear.
Planetary gearboxes are also used in wheeled and tracked vehicles. They are also used in winch systems, which lift and lower loads. Typical applications include heavy machinery, such as cranes and earthmovers. Wheel drives are also widely used in municipal and agricultural vehicles, as well as material handling vehicles. The wheel drive is typically mounted directly into the wheel rim. A wheel drive may be fitted into two, three, or even four wheels.
A planetary gear set may be used in stages to provide different transmission rates. In order to choose the right gearbox for your application, consider the torque, backlash, and ratio you need. Then, consider the environment where the gearbox is used. Depending on its location, it might need to be protected from weather, water, and other elements. You can find a wide range of different sizes in the market.
Spur gears
There are two basic types of gearheads: planetary and spur gearheads. Each has its advantages and disadvantages depending on the application. This article will discuss the differences between these two types of gearheads. Spur gearheads are commonly used for transmission applications, while planetary gearheads are more widely used for motors. Spur gearheads are less expensive to produce than planetary gearheads, and they are more flexible in design.
There are many different types of spur gears. Among them, a 5:1 spur gear drive ratio means that the sun gear must rotate five times per revolution of the output carrier. The desired number of teeth is 24. In metric systems, the spur gears are referred to as mm and the moon gears as modules. Spur gears are used in many different types of applications, including automotive and agricultural machinery.
A planetary geartrain is a combination of ring and spur gears, which mesh with each other. There are two kinds of planetary geartrains: simple planetary gears and compound planetary gears. Spur gears are the most common type, with a sun gear and ring gear on either side of the sun. Simple planetary gears feature a single sun and ring gear, while compound planetary gears use multiple planets.
A planetary gearbox consists of two or more outer gears, which are arranged to rotate around the sun. The outer ring gear meshes with all of the planets in our solar system, while the sun gear rotates around the ring gear. Because of this, planetary gearboxes are very efficient even at low speeds. Their compact design makes them a desirable choice for space-constrained applications.
Helical gears
A planetary helical gearbox has two stages, each with its own input speed. In the study of planetary helical gear dynamics, the base circle radius and full-depth involute teeth are added to the ratio of each gear. The tangential position of the planets affects the dynamic amplifications and tooth forces. The tangential position error is an important factor in understanding the dynamic behaviour of helical planetary gears.
A helical gearbox has teeth oriented at an angle to the shaft, making them a better choice than spur gears. Helical gears also operate smoothly and quietly, while spur gears generate a thrust load during operation. Helical gears are also used in enclosed gear drives. They are the most common type of planetary gearbox. However, they can be expensive to produce. Whether you choose to use a helical or spur gearbox depends on the type of gearbox you need.
When choosing a planetary gear, it is important to understand the helix angle of the gear. The helix angle affects the way the planetary gears mesh, but does not change the fundamentals of planetary phasing. In each mesh, axial forces are introduced, which can either cancel or reinforce. The same applies to torques. So, if the ring gear is positioned at an angle of zero, helical gears will increase the axial forces.
The number of teeth on the planets is a variable parameter that must be considered in the design phase. Regardless of how many teeth are present, each planet must have a certain amount of tooth spacing to mesh properly with the ring or sun. The tip diameter is usually unknown in the conceptual design stage, but the pitch diameter may be used as an initial approximation. Asymmetrical helical gears may also cause undesirable noise.
Various sizes
There are several sizes and types of planetary gearboxes. The planetary gear sets feature the sun gear, the central gear, which is usually the input shaft, and the planet gears, which are the outer gears. A carrier connects the planet gears to the output shaft. The primary and secondary features of the planetary gearbox are important factors to consider. Besides these, there are other things to consider, such as the price, delivery time, and availability around the world. Some constructors are quicker than others in responding to inquiries. While others may be able to deliver every planetary gearbox out of stock, they will cost you more money.
The load share behavior of a planetary gearbox is comparable to that of a spur or a helical gearbox. Under low loads, individual gear meshes are slightly loaded, while other components have minimal deflections. In general, load sharing behaviour is affected mostly by assembly and manufacturing deviations. In this case, the elastic deflections help balance these effects. The load-sharing behavior of a planetary gearbox improves when the load increases.
Planetary gearboxes come in different sizes. The most common size is one with two or three planets. The size and type of the gears determine the transmission rate. Planetary gear sets come in stages. This gives you multiple transmission rate choices. Some companies offer small planetary gearboxes, while others offer larger ones. For those with special applications, make sure you check the torque, backlash, and ratio.
Whether the power is large or small, the planetary gearbox should be matched to the size of the drive. Some manufacturers also offer right-angle models. These designs incorporate other gear sets, such as a worm gear stage. Right-angle designs are ideal for situations where you need to vary the output torque. When determining the size of planetary gearboxes, make sure the drive shafts are lined up.
Applications
This report is designed to provide key information on the Global Applications of Planetary Gearbox Market, including the market size and forecast, competitive landscape, and market dynamics. The report also provides market estimates for the company segment and type segments, as well as end users. This report will also cover regional and country-level analysis, market share estimates, and mergers & acquisitions activity. The Global Applications of Planetary Gearbox Market report includes a detailed analysis of the key players in the market.
The most common application of a planetary gearbox is in the automobile industry, where it is used to distribute power between two wheels in a vehicle’s drive axle. In a four-wheel-drive car, this system is augmented by a centre differential. In hybrid electric vehicles, a summation gearbox combines the combustion engine with an electric motor, creating a hybrid vehicle that uses one single transmission system.
In the Global Industrial Planetary Gearbox Market, customer-specific planetary gears are commonly used for automated guided vehicles, intra-logistics, and agricultural technology. These gears allow for compact designs, even in tight spaces. A three-stage planetary gear can reach 300 Nm and support radial loads of 12 kN. For receiver systems, positioning accuracy is critical. A two-stage planetary gearbox was developed by CZPT. Its internal gear tension reduces torsional backlash, and manual controls are often used for high-quality signals.
The number of planetary gears is not fixed, but in industrial applications, the number of planetary gears is at least three. The more planetary gears a gearbox contains, the more torque it can transmit. Moreover, the multiple planetary gears mesh simultaneously during operation, which results in high efficiency and transmittable torque. There are many other advantages of a planetary gearbox, including reduced maintenance and high speed.
editor by czh 2023-01-26