Huashida supplier made in China replacement parts in Sao Jose dos Campos Brazil Manufacturer Extruder Extrusion Line for HDPE Protective Jacket Pipe of Pre Insulated Pipe with top quality

We – EPG Group the most significant gearbox & motors , couplings and gears manufacturing facility in China with 5 diverse branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Huashida Manufacturer Extruder/Extrusion line for HDPE Protecting Jacket pipe of Pre-Insulated Pipe

Efficient        Intelligent        Large top quality

—The extrusion line comprise gear and units as underneath,
1set Vacuum loader
1set Hopper dryer
1set Large-performance one screw extruder
1set twenty five/25 one screw extruder for mark line
1set Vacuum calibration table
1set Water spraying tank
1set Hauling device
1set Chopping device
1set Stacker

I. Pipe Utilization
—HDPE jacket pipe is the outer casing of the completely ready insulated pipe, which is widely utilised in district heating and cooling, oil and gas, and other industrial places.

II. Device Benefits
—High-effectiveness extruder provides bigger output, secure overall performance.
For case in point
SJ90/33—600-700kg/h
SJ120/33—800-900kg/h
SJ150/33—a thousand-1200kg/h

—In contrast with the inflating technique (inner stress strategy)
1. For 24 hours of operating, it reduces 2-3 staff for every single shift.
2. There are much squander pipe and materials, no require employees to crush squander materials.
three. Higher-efficiency. Get Diameter 960mm as an case in point, Output is approximately 60 pcs of 11.6meters pipe, it is considerably larger output than that of inflating technique.
four. Pipe wall is regular and clean, to decrease waste of raw material, and pipe thickness is adjustable.
five. No need to have trim edge, when forming.

III. Major device- High-effectiveness solitary screw extruder
—Single screw is with barrier & mixing head the barrel is new design with slotting (channel), Both make the protection of great jellification, huge output, and steady performance.

IV. Controlling system
The complete line could be controlled by PLC, with a very good human-device interface, all technical parameters could be set and indicated by touching the display screen. The controlling technique is designed in accordance to the consumer S need, to be with PLC, or without.

V. Electrical system
—ABB frequency converter or EUROTHERM speed controller
—Japan RKC temperature controller
— SIEMENS AC contactors

VI. Stacker

Customer visiting&Shipping and delivery

The use of authentic tools manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our company and the detailed substitute elements contained herein are not sponsored, authorized, or manufactured by the OEM.